When we install the bulb socket, we should first confirm whether the bulb socket installed by ourselves meets the voltage standard, and whether the quality is passed, and whether there is damage, and so on. The minimum cross-section of the conductor of the bulb socket should conform to the minimum cross-section area prescribed by the state, because if the minimum cross-section of the conductor of the bulb socket is lower than the minimum cross-section area prescribed by the state, it will easily lead to the accident of burning the conductor, burning the bulb socket
and even leading to fire accident. Therefore, when we connect the bulb socket, we must choose the conductor larger than the minimum section of the national standard to ensure the normal operation of the bulb socket.
Incandescent lamps must be the most common lamps in our past. Although they are very rare in cities nowadays, there are still many markets in most rural areas. The bulb socket of incandescent lamp is the same as the bulb socket of fluorescent lamp, which are both adopting screw socket. The structure of screw socket is simple and convenient to install. Before installing the screw bulb socket, we should first confirm whether the bulb socket is in good condition and whether there is leakage. Because the structure of the screw bulb socket is simple and there are relatively few measures to prevent leakage, we should confirm the quality of the bulb socket before installing the screw bulb socket.
Because of its simple structure, screw lamps are relatively simple in wiring. We just need to connect the wiring to the end of the central contact of the screw lamp and the zero wire to the end of the screw thread. For bolted bulb socket with switch, we should pay attention to the switch part of the bulb socket, because the bolted bulb socket with switch is very close to the lamp. If the quality of the switch is not up to standard, it is easy to cause leakage accident. Therefore, when installing bolted bulb socket with switch, we should pay attention to the switch of the bolted bulb socket. The switch can not expose the metal part. If the metal part is exposed, we don't use it and replace it in time.
When we install the bulb socket, the most basic thing is to install firmly, especially the bulb socket above the roof. If the installation is not firm, it is easy to fall.